13
Nov
Off

Tile Repair Tips For The Best Looking Floors

Many homeowners love tile floors over any other options. They are easy to maintain, durable and are also beautiful but they are also prone to damage. That’s where these tile repair tips will come in handy.

  1. Tile Has Small Chips – If there are small chips in your tile, you can repair it using nail polish. Find a nail polish in the same color as your tile. If it’s not available, you can mix different colors to find the exact one. Dab the nail polish on the chipped area delicately. If the color changes with time, you can always remove it and dab again for a fresh look.
  2. Tiles With Larger Chips Or Holes – If the holes or chips can’t be repaired with nail polish you can pack them with ceramic filler. You can blend the colors as you wish to create the best patch job effortlessly. When the filler is completely dried up, you can sand it up to make it smooth and add a coat of lacquer for the best protection.
  3. Cracked Tile – If there are cracks in your tile, you should use siliconized caulk to fill in the cracks. If it has dried up and looks very unsightly, you should paint it to blend perfectly with the tile design. You should consider urethane or oil based paint to support any foot traffic to prevent further damage.
  4. Broken Tiles – Are you tiles cracked too badly? Are there any missing chunks? Well, your tiles need to be replaced. If there are extra tiles left over after installation, you can replace the broken tile effortlessly. However, you can also take out the broken tile and bring it to the tile supplier to find a matching piece for the best results.
  5. Outdated Tiles – Has your floor started showing signs of wear and tear? Well, it’s a sign that your tile has worn out. Therefore, you need to give your floors a brand new look by repainting the tiles. Start by scrubbing the floor properly then sand it. With a sprayer or roller, you can cover the old tile with the paint then leave it overnight to dry before sealing with floor finish.
  6. Loose Tiles – Use a putty knife or chisel to remove the loose tiles. Make sure you work very carefully and slowly to avoid breaking the remaining tile. Remove the old adhesive from the subflooring. Use new adhesive on the subfloor and the underside of the tile before putting the tile back in place.
  7. Cracked, Crumbling Or Stained Grout – If there is any problem with your grout your tile will ultimately look bad. It’s also a sign of something underneath. For instance, there might be water penetrating underneath the tile causing rot in the subflooring. To prevent these issues, you need to remove the old grout and replace it immediately. Seal the tiles properly to avoid any dirt or moisture from getting through.

In conclusion, your floor tiles are a worthwhile investment but with these repair tips your tiles should be durable. Visit evolvetiling.com/waterproofing/waterproofing-services-sydney/ for more information.